Membrane Coatings

Stellatar E/EW

Technical Information

Type of Material – Stellatar E/EW impervious membrane is an epoxy resin tar-based coating system.

Properties and Usage

Stellatar E/EW impervious membrane is used for coating concrete surfaces, especially in areas where the water resources need to be protected.

Stellatar E/EW impervious membrane is shrinkage crack bridging and of good chemical resistance. Due to the conductivity of the Stellatar EWL trowelling layer, the coating can be controlled not only visually, but also by spark testing.

Stellatar E/EW impervious membrane is fit for traffic with rubber-tyred vehicles. In case of strong mechanical stress it should be covered with Stellapox MC or even better with a tiling.

Mineral Oils
Gasoline
Benzene, Toluene and Xylene
Alcohols
Esters and Ketones
Hydrochloric Acid (Upto 37%)
Sulphuric Acid (Upto 60%)
Nitric Acid (Upto 20%)
Phosphoric Acid
Hydrofluoric Acid (Upto 10%)
Formic Acid (Upto 10%)
Lactic Acid (Upto 10%)
Sotium And Potassium Lye
Chlorine Bleaching
Ammonia Resistant
Formaldehyde Resistant
Hydrogen Peroxide

Not Resistant

Resistant at 20°C

Temporarily Resistant at 20°C