Stellatar

Stellatar impervious membrane is an epoxy resin, tar-based coating system.

Structure

• Stellatar EW levelling compound, alternatively
• Stellatar EWL trowelling compound (with spark test)
• Stellatar E/EW basic coat
• Stellatar EW finish coat
• Total layer thickness approx. 3.5mm

Properties and fields of use

Stellatar E/EW impervious membrane is used for coating concrete surfaces, especially in areas where the water resources need to be protected. Stellatar E/EW impervious membrane is shrinkage crack bridging and of good chemical resistance. Due to the conductivity of the Stellatar EWL trowelling layer, the coating
can be controlled not only visually, but also by spark testing.

Stellatar E/EW impervious membrane is fit for traffic with rubber-tyred vehicles. In case of strong mechanical stress it should be covered with Stellapox MC or even better with a tiling. Colour finishing can be obtained by additionally applying sealing compounds such as Stellapox A, AR or a coating such as Stellapox MC. In these cases, Stellatar EW finish coat is to be sanded with a quartz powder of grain size
0.5 - 1.0mm.

Standard colours

• Olive Yellow
• Reseda Green
• Pale Green
• Stone Grey
• Pebble Grey