Vinyl Ester Resin-Based Coatings

Stellagen MC-AS
Resistant to Hydrofluoric Acid

Technical Information

Type of material - Stellagen MC-AS coloured is a colour pigmented, conductive, vinyl ester resin-based coating system to be applied in several layers.

Due to the good resistance to chemicals and its fitness for forklifts, it can be applied in many industrial fields, particularly against oxidising materials and various solvents.

The thickness of the coating can vary between 3-9mm.

Structure: Floor Areas – The standard coating thickness varies between 3-4mm.

• Stellapox primer
• Stellagen floor coat AS
• Stellagen floor sealing coat in order to increase the coating thickness
• Stellapox floor coat

Must be applied between Stellapox primer and Stellagen floor coat AS. The coating thickness increases by 3.0 to 6.0 mm/layer.

Standard Colours

• Olive Yellow
• Reseda Green
• Pale Green
• Stone Grey
• Pebble Grey

Physical Data

Compressive Strength	DIN 51067	N/mm²	90
Tensile Strength	DIN 53455	N/mm²	15
Elongation at rupture	DIN 53455	%	0.05
Modules of elasticity	DIN 53457	N/mm²	16.10³
Soecial derivation ability to earth (Re)	DIN 51953		>106
Linear thermal	DIN 52328	-6	-1
Expansion coefficient	10	.K	22
Temperature limit of use	0°C		60

Mineral Oils
Gasoline
Benzene, Toluene and Xylene
Alcohols
Esters and Ketones
Trichloethylene
Methylene chloride
Aldehyde
Hydrochloric acid
Phosphoric acid 40%
Chromic acid 30% CrO3
Hydrofluoric acid 40%
Sulphuric acid 70%
Nitric acid 40%
Formic, acetic, lactic acid
Sodium and potassium lye 50%
Chlorine bleaching 13%
Ammonia 25%
Amines
Vegetable and animal oil and fat
Hydrogen peroxide 30%

	Not Resistant		Resistant at 20°
	Temporarily Resistant		Temporarily Resistant at 20°C