Decapol MD
Description
The Decapol M.D system is a heavy-duty flow applied topping based upon polyurethane technology which provides excellent resistance to abrasion, chemical attack and other physical aggression.
Composition
Water dispersed polyurethane resin system combined with graded silica aggregates.
Appearance
Seamless matt, smooth finish of uniform colour.
Durability
The highest order of durability, resistance to abrasion, impact, chemical attack and penetration.
Thickness
Decapol M.D – Applied between 3 and 5mm
Typical Installations
The Decapol M.D system is ideally suited to areas subject to heavy-duty use: -
- Chemical processing
- Food processing/wet areas
- Brewing/dairy clean areas
- Engineering process areas
Substrates
Concrete, polymer reinforced screeds, grano concrete, mild steel and water-resistant plyboard.
Chemical Resistance
Excellent resistance to organic and inorganic acids, alkalis, fuel and hydraulic oils, aromatic and aliphatic solvents. Only when a full chemical cure has taken place. Please refer to technical data sheet reference TD112.
Colours Available
All standard Prokem colours except white, and magnolia
Coverage Rates
Decapol M.D at 4.0mm 5.0mm 6mm Coverage kg/m² 7.60 9.50 11.40
Technical Data
Compressive strength to BS6319 Part 2 (N/mm²)- 62.0
Tensile strength to BS2782:320D (N/mm²) - 15.0
Flexural strength to A.S.T.M. D790-84a (N/mm²)- 35.0
Elastic modulas to BS2782:320D (N/mm²) - 1530.0
Slant shear bond strength to BS6319 (N/mm²)- 55.0
Abrasion resistance by Taber mg loss/1000 cycles/ 1kg load with H18 wheel - 900
TRRL slip resistance - 65 Dry
Surface spread of flame to BS 476 Part 7 - Class 2