Prodec

Prodec is a two pack solvent free resin coating modified to impart toughenss, resilience and waterproofing properties to the cured film. The abrasion and impact resistance, together with the low temperature flexibility and excellent adhesion to concrete, make Prodec and ideal material for use as a membramce subjected to vehicular traffic. By broadcasting a layer of Quartz or Aluminium Oxide between coats , a slip or skid resistant surface profile can be achevied.

Typical Uses

As slip resistant membrane for car parks, ramps, plant rooms and walkways etc.

As a protective lining for chemical bunds where a flexible membrane is required.

Advantages

Tough and hardwearing
Flexible
Excellent abrasion and impact resistance
Proven chemical resistance
Low odour during application
Range of Colours
Good Water and weathering resistance
Non-slip or non-skid finish available

Typical Properties

Pot life @ 20 degrees C: 60 Minutes

Colours: Grey, green red as standard ( BS8400 or RAL colours can also be supplied )

Minium overcoating interval: 12 hours @ 20 degrees C
Maximim overcoating interval: 48 hours @ 20 degrees C
Tenisle strength: 9MPa ( 7 days cure @ 20 degress C )

Elongation at break: 85% @ 20 degrees C
Chemical Resistance : Excellent resistance to dilute acids and alkalis, oil, petrol, diesel, vegetable oils.

Coverage

A 5kg pack is sufficient to coat 8.3 m2 of surface with the recommended two coat treatment, providing an overall d.f.t. of 450 microns approx. Coverage will be reduced with slip resistant systems because of the increased surface area to be covered with the second coat.