Tufscreed

Description

Tufscreed is a three pack Epoxy Resin based floor screed designed for application at 4-6mm thickness. Tufscreed comprises of a base component, a curing agent and a specially graded Aggregate component.

Tufscreed is easy to apply and does not stick to the trowel.

Tufscree is non-dusting, chemical and abrasion resistant, non-slip in nature and may be rapidly opened to traffic.

Typical Uses

Seamless protective and decorative, thin section screeds for food factories and dairies, abbatiors, plating ships, hospitals, sugar refineries, breweries, chemical bunds etc

Advantages

Highly Durable
Abrasion and Impact Resistant
Non-Slip
Easily Maintained
Excellent Chemical Resistance
Low Odour

Typical Properties

Colour: Light grey (any BS4800 or RAL colour can also be supplied)
Density: 2.2kg / litre
Volume Yeild: 11.4 litres per pack
Coverage: 1.9m2 @ 6mm thickness
Pot Life: 50-60 minutes @ 20 degrees Celsius
Compressive Strength: 65 MPa after 7 days
Flexural Strength: 24 MPa
Tensile Strength: 11.4 Mpa
Taber Abrasion Resistance: 80 mg weight loss per 1000 cycle test (CS17 abrasive wheels)
Water Absorption: < 0.1% by weight after 7 days immersion
Maximum Service Temperature: 70 degrees C ( continuous ); 90 degrees C (intermittant)
Chemical Resistance: Excellent resistance to a wide range of industrial chemicals.

Coverage

A 25kg pack yields 11.4 litres of material, sufficient for an area of 2.85m2 @ 4mm thickness.